881 Butler Branch Road
Columbia, KY 42728
Phone (502) 509-5188
sales@processinspector.com

Control & Monitor Force & Distance

The Process Inspector is simple and easy to use and integrates to any new or existing Press or Riveter in the industry in minutes. No mater if your machine is mechanical, hydraulic, pneumatic or electric the Process Inspector is your solution!

Simply attach your LVDT sensor and static load cell along with a five minute calibration and a five minute recipe creation and your ready to run. The Process Inspector includes large easy to read screens with tutorial instructions prompting you to enter your height and force criteria. The Inspector™ will do the rest!

Ask about our free demo!.

Force & Distance Monitoring

DATA COLLECTION SCREEN
  • Displays data from the last 10 machine cycles

  • Data collection via RS232 or Ethernet

  • Program and technical assistance via Ethernet

Force Monitoring Distance
MEASURED HEIGHT SCREEN
  • Teach the controller your rivet height

  • The capability to run while in a set up screen extremely simplifies the process.

  • Store your cycle time to document your flow control settings

Distance Monitoring Force

SCREEN SELECT
  • Easy to navigate thru the system
  • Page by page instruction
  • Easy enough to set up Recipes in 5 minutes
  • Two levels of operation: Supervisor/Operator

  • Prewired I/O for expanded machine functions



  • Process Inspector #1 - Force and Distance Only for a Pressing Operation

  • Process Inspector #2 - Same as #1 with Typical Machine Control for a Press Operation


Product Description - For all existing Presses (pneumatic, hydraulic, mechanical or electrical type machine) that allows for real-time adjustment of the LVDT when a micrometer adjustment is made. This unit will display like a DRO (Digital Read-Out) on a Bridgeport Mill in real-time. So when you make the micrometer stroke adjustment your display will project the new projected press or rivet height prior to making the first machine cycle.

You do not need any additional machine controls operating solenoids , switches, light curtains etc. - just using it as an In-Process Monitoring and Control Unit.

 
  • Process Inspector #3 - Force and Distance Only for a Riveting Operation

  • Process Inspector #4 - Same as #3 with Typical Machine Control for a Riveting Operation


Product Description - For all existing Riveters (pneumatic, hydraulic, mechanical or electrical type machine) that does not allow for real-time adjustment of the LVDT when a micrometer adjustment is made. This unit will not display like a DRO (Digital Read-Out) on a Bridgeport Mill in real-time. So when you make the micrometer stroke adjustment your display will not project the new projected press or rivet height until after the first machine cycle is made.

You do need additional machine controls operating solenoids , switches, light curtains etc. - just using it as an In-Process Monitoring and Control Unit.

Please call for current pricing and additional information.